PCB Fabrication

//PCB Fabrication

PCB Fabrication

We have the capability of manufacturing these PCB’s with a variety of PCB materials – FR-4, FR-4 with high Tg, Polyimide, Getek, Nelco, Isola,MEGTRON 6 and Taconic Digital Materials. We have the ability to manufacture these boards for Lead Free compatibility.

On a daily basis we manufacture PCB boards with blind/buried vias, controlled impedance, conductive and non-conductive via fill, edge plating, half edge holes,castellations.

We also routinely build PCB boards that require back drilling, selective finishes, positive etchback, and heavy copper up to 6 oz.

We can provide PCB boards that are IPC Class III and MIL standard

We can provide quick turns on digita PCB boards as fast as 24 hours depending on the complexity of the board.

6 layers rigid-flex PCB

Rigid part: 6 layers
Flex part: 2 layers
PCB thickness: 1.6mm
Material: FR4+katpon
Immersion gold: IPC4552 (more…)

4 layers flex PCB board

Rigid part: 4 layers
Flex part: 2 layers
PCB thickness: 1.6mm
Material: FR4+Kapton
Immersion gold: IPC-4552 (more…)

4 layers Hybrid PCB

4 layers
PCB thickness:2.0mm
Hybrid stack up
Rogers 4350+FR4 (more…)

12 layers IC test PCB board

12 layers
PCB thickness:5.0mm
copper thickness:1oz for all layers
FR4, Tg180
Max. Aspect Ratio:10.1 (more…)

10 layers Gold finger PCB board

10 layers rigid PCB board
FR4 Tg 170
Immersion gold: IPC-4552
Hard gold plating on gold fingers: 30u”
PCB thickness: 1.6mm+/-0.16mm (more…)

2L Aluminum-based board

2 layers
Berquist Aluminum
1.6mm with 3.0 W/(m.K)
HAL Lead free finish
Copper thickness 2oz
Though plated via holes

Load More Posts
2019-07-24T13:45:53+00:00September 25th, 2017|PCB Manufacturing|